Apple Watch Series 7 Teardown Reveals Battery Capacity, Display Updates and More

Ifixit Apple Watch Teardown 1

With the Apple event this week and the imminent launch of new MacBook Pro models, it’s easy to forget that the Apple Watch Series 7 just came out last Friday. iFixit didn’t forget, though, and has done one of its traditional teardowns on Apple’s newest wrist-worn device.

Today’s teardown features both the 41 and 45mm versions of the watch, and it unveils some secrets we weren’t previously aware of. The 45mm ‌Apple Watch Series 7‌ has a 1.189Wh battery inside (309 mAh), which is a 1.6 percent increase over the 1.17Wh battery in the 44mm Series 6.

Series 7 on left, Series 6 on right (44/45mm models)



The 41mm ‌Apple Watch Series 7‌ features a 1.094Wh battery, a 6.8 percent increase over the 1.024Wh battery in the prior-generation 40mm model. Both batteries have slightly wider dimensions, but iFixit says the increase likely goes to the new, brighter displays rather than adding battery life.

The internals of the Series 7 are similar to the Series 6, but there are small differences, such as the removal of a bracket where the diagnostic port was once located.

Series 7 on left, Series 6 on right (44/45mm models)



Apple has touted IP6X dust resistance for the Series 7, which older models may have had too, but Apple just didn’t do the specific test for the certification. There are, however, some new ingress-protection measures such as a mesh covering the speaker grille. The removal of the diagnostic port may also contribute to the dust resistance, and removing this port saves some internal space.

iFixit teamed up with former Apple engineers who work at Instrumental for the teardown, giving us some additional context into why the Apple Watch may have seen delays prior to its October launch.

According to iFixit, the ‌Apple Watch Series 7‌ has new display technology that was likely a “huge pain to manufacture at scale.” The new Apple Watch appears to be equipped with a touch-integrated OLED panel, or an “on-cell touch,” which is also used in the iPhone 13. Apple is also using just one flex cable for the display instead of two, which iFixit says is “not a trivial change.”

Every teardown comes with a repair score, and the Series 7 earned a 6 out of 10. iFixit says that display and Taptic Engine swaps “worked great” in its testing, as did changing out the battery.

Related Roundup: Apple Watch Series 7
Buyer’s Guide: Apple Watch (Buy Now)
Related Forum: Apple Watch

This article, “Apple Watch Series 7 Teardown Reveals Battery Capacity, Display Updates and More” first appeared on MacRumors.com

Discuss this article in our forums


Full Story (EN):More …
Prevod :Prevod teksta
Source:MacRumors

tnews