The Philips Hue line of lights have been controllable via an indoor motion sensor for some time, but Signify is today introducing an Outdoor Motion Sensor that's designed to control the range of outdoor Hue lights that are now available for purchase.

The Outdoor Motion Sensor works just like the indoor Smart Motion Sensor, automating your lights and other HomeKit products to come on when motion is detected and turn off when there's no motion detected, all on an automatic basis.

huemotionsensor
As with all Hue products, the Outdoor Motion Sensor is designed to work with a hub, so a Hue hub and Hue lights are required to use the product, even though it can interface with other ‌HomeKit‌ devices.

Design

The Outdoor Motion Sensor is small and relatively unobtrusive, but it does have a design that stands out somewhat, so it's not entirely unnoticeable. It features a square-shaped plastic housing with a protruding white circle where daylight and motion sensors are built in.

huemotionsensor
At the back, Outdoor Motion Sensor features a mounting plate and a variety of mounting options so you can put it wherever it works best. There's an option for a flat wall or mounting it at a corner, which would allow for maximum view of a driveway, lawn, or entryway.

huemotion5
I live in an apartment so I'm not able to do wall mounting, but I'm including this image of the Outdoor Motion Sensor from Amazon to show the different ways that it can be mounted -- flat, on an inward corner, or on an outwards-facing corner. For testing purposes, I have tall shelves outdoors where I keep plants, which is what I used, so it also doesn't necessarily need to be permanently mounted to work well.

huemotion7
You can screw the Outdoor Motion Sensor into the wall outside, and the hardware that you need is included (wall brackets, screws, and screw plugs), making it simple to get up and running. There is a built-in battery inside the Outdoor Motion Sensor that's supposed to last for about two years, so you don't need to worry about charging it. It's using AA batteries, so when the included batteries are exhausted, it won't be a hassle to get a replacement.

huemotion6
The casing of the Outdoor Motion Sensor is IP54 water resistant, so it can hold up to rain, snow, and other bad weather, though you won't want to submerge it.

Functionality

The motion sensing feature in the Outdoor Motion Sensor can detect movement from up to 39 feet away, which is a longer range than the indoor sensor. I wasn't able to test the full range, but set up and tested both indoors and in my backyard, it was able to reliably detect my movement close up and as far away as 25 feet.

The Outdoor Motion Sensor's lens features a 160 degree field of view, which is similar to something like a fisheye lens, meaning it can take in quite a lot of the landscape in front of it. The lens has also been designed to detect movement directly below it with an 80 degree vertical view, limiting blind spots.

huemotion2
You need to connect the Outdoor Motion Sensor to a Philips Hue hub and Philips Hue lights, so while it works from 39 feet away, it needs to be close enough to the hub or a Hue light to function.

The Outdoor Motion Sensor can work with indoor or outdoor lights from Hue (and with other ‌HomeKit‌ lights). It's useful for lighting up the outdoor area when motion is detected, but it's also handy for turning on the lights inside when you get home from work or when someone approaches. If you're not home and have the lights inside come on automatically with motion detection, it has the potential to be a good theft deterrent.

huemotionsensordistance
There are actually a few different sensors built into the device. It can detect motion, obviously, but it also has a daylight sensor inside so it can tell the difference between day and night. This allows you to customize the actions that happen based on the amount of light the sensor is detecting. It's also able to detect the ambient temperature, which is a nice bonus feature.

App and HomeKit

The Hue Outdoor Motion Sensor can be viewed and managed either by the Hue app or with the Home app, and which you choose will depend on how you want to use it. If you want to use it exclusively with Hue products, the Hue app works well, but if you want to use it with other ‌HomeKit‌ devices, the Home app is the better choice.

In the Hue app, you can choose the Motion Sensor's behavior by day, by night, and set what should be done when it either detects motion or does not detect motion.

huemotionsensorhuesettings
For example, you can turn the Outdoor Motion Sensor off entirely during the day and then after sunset, set it to turn on the lights whenever motion is detected, which is probably behavior most people will use it for.

You can also have the lights turn off after a set period of time when no motion is detected, so the lights can come on for anywhere between 1 and 60 minutes when motion is detected and then turn off afterwards automatically.

huemotionsensorsettings
The Outdoor Motion Sensor is ideal for automating your outdoor lights to make sure there's always light when you're outside in the evening and to potentially scare off burglars or other malicious people who might be near your house. You can also set the Outdoor Motion Sensor to control the indoor lights, so you can, for example, have it turn on the inside lights as you approach the house if you don't have outdoor Hue lights for it to work with.

In the Home app, you can use the Outdoor Motion Sensor in ‌HomeKit‌ Automations as a trigger, which allows it to work with non-Hue ‌HomeKit‌ devices as well as Hue devices. This is the only way to set up automations that involve other ‌HomeKit‌ products as the Hue app limits you to control with Hue lighting scenes.

hueoutdoormotionsensorautomation
You can also view the Outdoor Motion Sensor in the Home app, where it displays the current brightness of the room in lux and the temperature as add-on features. Both of these readings can be seen in the Home app exclusively and are not available in the Hue app.

huemotionsensortemplux
I prefer using the Home app to manage the Outdoor Motion Sensor because what it's doing is a bit more clear and I can create more specific Automations. For example, between 5pm and 6pm, I can have the Outdoor Motion Sensor turn on both my indoor and outdoor lights when it detects motion, activating the indoor lights at the specific moment when I get home at night. A separate Automation can be set for the night time that will turn off the lights when no motion is detected or turn on the lights when it is detected.

Between both of the apps, there's quite a lot of granular control over how the Outdoor Motion Sensor works, so it should fit almost any use case. I suspect most people will want to use it specifically to control outdoor lights without complicated Automation setups because indoor lighting can be controlled via indoor motion sensing options.

You will want to pick one app or the other to use so there aren't conflicting and confusing automated options set up. Writing about it makes it sound complicated, but in reality, automating the Outdoor Motion Sensor's behavior takes just a few minutes once you know just what you want it to control.

hueoutdoormotionhome
If you don't want the Outdoor Motion Sensor to control your lights at any time, it can be disabled within the Hue app. The Hue app also has options for adjusting the sensitivity of daylight and motion detection to fine tune how and when it's activating your lights. You can, for example, turn down the motion detection sensitivity if it's often activating due to moving tree branches or animals passing by, or turn it up if your lights aren't coming on when motion is detected.

hueadjustmentsettings
As for Siri, you can ask questions about motion detection, light level, and temperature. Other than that, there's not a lot that can be done with the Outdoor Motion Sensor using voice, because it's mostly meant to be used for automation rather than interaction.

You're also able to set up notifications that will let you know if and when motion is detected using the Home app so you can get alerts when you're away from home.

Bottom Line

If you need a HomeKit-enabled motion sensor that's going to be able to stand up to being outside, the new Hue Outdoor Motion Sensor is an excellent choice.

It's not overly expensive, the motion sensing and daylight detection features work reliably, and it gives you a quick, easy way to automate your outdoor (or indoor) lights so you don't have to think about them.

Sensors are a great addition to ‌HomeKit‌ and the Hue Outdoor Motion Sensor can mimic the behavior of traditional outdoor lights that have motion-based activation features.

How to Buy

The Hue Outdoor Motion Sensor can be purchased from Amazon.com or from the Hue website for $49.95.

Top Rated Comments

MallardDuck Avatar
66 months ago
All we need now is a bridge with more memory for all these cool devices and lights.
Score: 4 Votes (Like | Disagree)
jclo Avatar
66 months ago
Does that sentence make any sense? Can it be both relatively unobtrusive and clearly noticeable? Or is it "clearly a smart device"? If so, how?
I'm sorry that doesn't make sense. I'll reword it. What I mean is that while it's small, it very much looks like a smart device like a camera because of the design. So while it is relatively unobtrusive, it's not going to be unnoticeable to people.
Score: 3 Votes (Like | Disagree)
trifid Avatar
66 months ago
Biggest drawback is that Hue app is too limited in letting you customize complex logic on when/what to do with motion triggers.

For example if you want motion to trigger only during certain hours AND only if there is no other scene active, you can’t. It’s worthless to me without powerful customizability.
Score: 3 Votes (Like | Disagree)
djgamble Avatar
66 months ago
All we need now is a bridge with more memory for all these cool devices and lights.
Noooo!!! My 1.0 hub is identical to the 2.0 but they've mothballed it so it's getting no more updates, doesn't support Homekit (purely a software thing), requires a separate app and works like rubbish.

I protest the fact they want $100 (AUD) for a brand new 2.0. Please no 3.0...
Score: 1 Votes (Like | Disagree)
centauratlas Avatar
66 months ago
All we need now is a bridge with more memory for all these cool devices and lights.
Exactly, it is easy to bump up to the 50 device limit at present.
Score: 1 Votes (Like | Disagree)
zhenya Avatar
55 months ago

From a hardware perspective, this is great. I needed something exactly like this and will buy at least one.

From a software perspective, there is one thing missing that I badly need (unless someone knows how to do this): a back-to-previous-state command. For example, my outdoor hue lights are set to shift colors in a fairly complex way, which I achieved through a pattern of HomeKit automations. No matter what color they are on at any evening time, I'd like for them to turn bright white when they detect motion and then go back to the previous color when the motion is no longer detected.

The easiest way to do this (by far) would seem to be an option that simply returns the lights to their prior state when the motion stops. Is there something like this that I'm missing? As is, if I have 18 automations that set lighting colors during the week, it seems like I need 18 separate automations to get the lights back to those colors when the motion stops. This seems undesirably complicated.
iConnectHue does this perfectly. Hue Labs may work if you are ok with just this ONE customization, but I find the Labs interface really clunky if you start wanting to really manage your lighting at a granular level. iConnectHue is well worth the money.


Noooo!!! My 1.0 hub is identical to the 2.0 but they've mothballed it so it's getting no more updates, doesn't support Homekit (purely a software thing), requires a separate app and works like rubbish.

I protest the fact they want $100 (AUD) for a brand new 2.0. Please no 3.0...
The second hand market here in the US is flooded with these because it’s almost universally cheaper to buy a kit of bulbs including the bridge for “free” rather than buy the bulbs/bridges separately. The price is about $25 for a new bridge on the second hand market.
Score: 1 Votes (Like | Disagree)

Popular Stories

reset password request iphone

Warning: Apple Users Targeted in Phishing Attack Involving Rapid Password Reset Requests

Tuesday March 26, 2024 4:34 pm PDT by
Phishing attacks taking advantage of Apple's password reset feature have become increasingly common, according to a report from KrebsOnSecurity. Multiple Apple users have been targeted in an attack that bombards them with an endless stream of notifications or multi-factor authentication (MFA) messages in an attempt to cause panic so they'll respond favorably to social engineering. An...
Generic iOS 18 Feature Purple

iOS 18: What to Expect From 'Biggest' Update in iPhone's History

Wednesday March 27, 2024 11:10 am PDT by
At least some Apple software engineers continue to believe that iOS 18 will be the "biggest" update in the iPhone's history, according to Bloomberg's Mark Gurman. Below, we recap rumored features and changes for the iPhone. "The iOS 18 update is expected to be the most ambitious overhaul of the iPhone's software in its history, according to people working on the upgrade," wrote Gurman, in a r...
maxresdefault

Apple Announces WWDC 2024 Event for June 10 to 14

Tuesday March 26, 2024 10:02 am PDT by
Apple today announced that its 35th annual Worldwide Developers Conference is set to take place from Monday, June 10 to Friday, June 14. As with WWDC events since 2020, WWDC 2024 will be an online event that is open to all developers at no cost. Subscribe to the MacRumors YouTube channel for more videos. WWDC 2024 will include online sessions and labs so that developers can learn about new...
apple maps 3d feature

Apple Maps May Gain Custom Routes With iOS 18

Tuesday March 26, 2024 3:10 pm PDT by
Apple may be planning to add support for "custom routes" in Apple Maps in iOS 18, according to code reviewed by MacRumors. Apple Maps does not currently offer a way to input self-selected routes, with Maps users limited to Apple's pre-selected options, but that may change in iOS 18. Apple has pushed an iOS 18 file to its maps backend labeled "CustomRouteCreation." While not much is revealed...
General iOS 17 Feature Orange Purple

Apple Releases Revised Versions of iOS 17.4.1 and iPadOS 17.4.1 With Updated Build Number

Wednesday March 27, 2024 5:59 am PDT by
Apple on late Tuesday released revised versions of iOS 17.4.1 and iPadOS 17.4.1 with an updated build number of 21E237, according to MacRumors contributor Aaron Perris. The updates previously had a build number of 21E236. The revised updates are available for all iPhone and iPad models that are compatible with iOS 17 and iPadOS 17, but they can only be installed via the Finder app on macOS...
maxresdefault

Apple to Launch New iPad Pro and iPad Air Models in May

Thursday March 28, 2024 11:07 am PDT by
Apple will introduce new iPad Pro and iPad Air models in early May, according to Bloomberg's Mark Gurman. Gurman previously suggested the new iPads would come out in March, and then April, but the timeline has been pushed back once again. Subscribe to the MacRumors YouTube channel for more videos. Apple is working on updates to both the iPad Pro and iPad Air models. The iPad Pro models will...
applephilschiller

Apple's Phil Schiller Works 80 Hours a Week Overseeing App Store

Wednesday March 27, 2024 2:03 pm PDT by
With the App Store and app ecosystem undergoing major changes in the European Union, The Wall Street Journal today shared a profile on App Store chief Phil Schiller, who is responsible for the App Store. Though Schiller transitioned from marketing chief to "Apple Fellow" in 2020 to take a step back from Apple and spend more time on personal projects and friends, he is reportedly working...